Wax Maxer Pen Battery Replacement

Features:

• Perfectly designed to make the Wax Maxer pen to an all inclusive concentrate pen
• Built in concentrate silicon lined concentrate dish
• Micro USB charging
• Capacity: 1800mah Sub-Ohm Battery
• Threading: 510
• Temp/Voltage Settings
• Output Voltage:
• Silver Battery 2.6v - 4.2v
• Black Battery 4.2v
• Max Output: 9.7A
• Safety Cut Off: 10 seconds

Functions:

• Lock/Unlock: 5 Sequential Clicks
• Change Temp Settings: 3 Sequential Clicks
• Temp Settings (when the button is pressed):
• Red - Low (2.6v - 3.2v)
• Green - Medium (3.2v - 3.7v)
• Blue - High (3.7v - 4.2v)
• Charging Time: 4-5 Hours

Troubleshooting:

• Red light blinks 3 times when pressed:
• Explanation: Heater has a short.
• Fix: 
• Remove the heater and press the button again. If the battery blinks Red again 3 times (with no heater installed), the battery has a short and needs to be replaced.
• If the battery lights up normally with no atomizer, make sure to clean the heater thoroughly, and install it again. If the battery blinks Red again 3 times, the heater has a short and needs to be replaced. 
• Red light blinks 10 times when pressed:
• Explanation: Battery capacity is too low. 
• Fix: Charge battery.

Charge: 

1. Make sure your battery is completely Locked.
2. Plug your micro USB into the side of your Wax Maxer Pro battery.
3. Plug your cable into a wall charger.
4. Your battery will light up and while charging.
5. Your battery light will turn off once fully charged (4-5 hours).

SAFETY INFORMATION:

• Do not leave the charger in extreme temperatures (Very Hot or Very Cold)
• Do not charge near moist environments.
• Do not leave battery hanging by its cable. Make sure it is in a stable position.
• Do not leave charging for extended periods of time.
• Charge in a well ventilated area. 
• When charging, allow the battery to charge completely prior to using