DBV Heater Cover - New Replacement

This is a replacement heater cover for the Da Buddha Vaporizer! The 19mm female joint on this heater cover may arrive with either a frosted or non-frosted inner surface. A heater cover with a non-frosted joint is functionally identical to a heater cover with a frosted joint, and what you receive will depend on what we have available.

NOTE: Your heater cover will likely have tiny metallic streaks around the bottom where it mounts onto the metal heater stand. These are not scratches or cracks, these are streaks from the soft metal of the heater stand transferring onto the glass which is a harder material than the metal. We test every heater cover on a vaporizer at our production facility before we ship it out, and the metallic streaks are a direct result of this process. The metal is transferred onto the glass due to a phenomenon called 'galling', these markings are not a sign of poor quality in the glass, and are in fact a result of our quality assurance testing.

NOTE: If you have an older Da Buddha Vaporizer then your unit may have the old style of heater stand which is pictured below. If this is the case then we recommend that you purchase and install a Heater Stand Upgrade Kit before installing the new glass heater cover. If you do not want to purchase and install a Heater Stand Upgrade Kit, then we recommend that you purchase a Shim & Spacer Packet along with the heater cover, as you will need to install a new Shim & Spacer to make this heater cover fit properly. Here is what the older style of heater stand looks like:

And here is what the new style heater stand looks like. We recommend upgrading to this version by purchasing a Heater Stand Upgrade Kit along with this Spherical Heater Cover:

 Click here to watch a video that explains the difference between the two types of heater stand, and which discusses the benefits of upgrading your unit to the new heater stand.

Check the chart above to see all of the heater cover and wand designs which we have made over the years! This DBV Heater Cover is only compatible with the Da Buddha Vaporizer. This heater cover can be used with a DBV Wand or with an SSV Conical Wand.