Replacement Kevlar Heat Coil for G9 Classic Mini Enail by Greenlightvapes

This is a replacement 25mm Kevlar Heat Coil for the G9 Classic Mini Enail by Greenlightvapes. There are two different voltage options depending on what your country's power standard is; customers in North America and Japan should choose 110v, while customers in Europe and Australia should choose 220v. If you aren't sure which option you should choose check with your local power provider.

This heat coil plugs directly into the PID that came with your unit. The cable is wrapped with Kevlar for durability and heat protection. This iron heat coil attaches to the banger and is secured in place by a cotter pin. Check the manual that came with your unit if you need detailed assembly instructions. 

If you need a replacement banger, carb cap, and/or cotter pin they can be purchased with the Replacement Quartz Banger and Carb Cap for the G9 Classic Mini Enail by Greenlightvapes. 

This coil is wired to work with G9 Enail and Elev8R PID, the wire arrangement may not match other Enails with XLR connectors, below is the image of the pin out for the coil.

**You will be responsible for confirming the wiring is correct for your PID, we will not refund for coils that fail due to improper use with non-matching PIDS.**