How To Roll A Joint With Or Without A Crutch

How To Roll A Joint With Or Without A Crutch

Published by Elev8 Presents on 2/18/2021

 

How to roll a joint is maybe one of the first questions that someone may ask when they first start smoking CBD or cannabis.  With some practice you too can be awesome at rolling a joint.  Part of the experience of cannabis is playing with, seeing and loving the flower.  

We did some research and in our group we tested less than half the people rolled a joint with a crutch, yet when we look online for how to roll a joint video they mostly are all with a crutch.  So we wanted to show you how to roll a joint with and without a crutch.

Oh, and lets talk about a crutch quickly before we start to roll a joint.  Some or many call this a filter.  We have to say that this is NOT a filter and a crutch.  Why, because a filter will filter air particulates, ya, like the filter in a cigarettes and in your car.  This this thing is designed to keep the joint open to allow good air flow, or shale we say smoke flow.

How do you roll a joint?

  1. Grinder your herb in a good grinder
  2. Pull out the paper and put between your fingers.  Then fill with paper with herb making a pile with two mounds.  (these mounds will even out to make a smooth joint)
  3. Start to roll into a cylinder with your thumbs and fingers.  
  4. Tuck the ends of the paper between the herb and paper, then complete the roll.
  5. When you have a nice cylinder, leave the glue up, lick and finish rolling.
  6. Twist up ends to no herb falls out if this is for another time, or spark it up!

How do you roll a joint with a crutch?

  1. Grinder your herb in a good grinder
  2. Grab your paper crutch and fold a W, then roll it up.
  3. Pull out the paper and put between your fingers. Lay your crutch at one end, then fill with paper with herb making an two piles with the crutch at the end. (these mounds will even out to make a smooth joint)
  4. Start to roll into a cylinder with your thumbs and fingers.  This is a little harder to hold the crutch in and the herb, then rolling a joint without a crutch.
  5. Tuck the ends of the paper between the herb and paper, then complete the roll.
  6. When you have a nice cylinder, leave the glue up, lick and finish rolling.
  7. Twist up end to no herb falls out if this is for another time, or spark it up!

Products In This Article

By continuing you accept the Terms & Conditions and verify you are 21+ years old.